The New 3D Printing Thread

375 Replies, 242715 Views

Nigels

10-21-2019, 11:14 PM

Posting Freak

#169

(10-21-2019, 09:10 PM)Super Wrote: Wait...it printed in 2 colors?

No I printed the crystal separately Smile

The best part is the model is designed so that there is a hole in her right hand which leads to the hollow arm and down the body to the bottom, so you can wire an LED in to illuminate the crystal Smile

Mind you it would be possible to print in two colours using a CR-X Wink

Happily collecting things all my life... Big Grin

Messages In This Thread

The New 3D Printing Thread - by Nigels - 01-18-2019, 11:20 PM

RE: The New 3D Printing Thread - by Super - 01-19-2019, 01:35 AM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 07:11 AM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 08:23 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-19-2019, 08:08 PM

RE: The New 3D Printing Thread - by Super - 01-19-2019, 08:40 PM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 09:57 PM

RE: The New 3D Printing Thread - by Nigels - 01-22-2019, 10:51 PM

RE: The New 3D Printing Thread - by Super - 01-23-2019, 12:56 AM

RE: The New 3D Printing Thread - by Nigels - 01-23-2019, 07:42 AM

RE: The New 3D Printing Thread - by Super - 01-23-2019, 08:18 AM

RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 01:31 AM

RE: The New 3D Printing Thread - by Super - 01-24-2019, 07:55 AM

RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 11:31 PM

RE: The New 3D Printing Thread - by Nigels - 01-29-2019, 10:26 PM

RE: The New 3D Printing Thread - by Super - 01-29-2019, 10:39 PM

RE: The New 3D Printing Thread - by Nigels - 01-30-2019, 01:27 AM

RE: The New 3D Printing Thread - by Nigels - 02-01-2019, 06:54 PM

RE: The New 3D Printing Thread - by chrisjo - 02-01-2019, 10:46 PM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 01:14 AM

RE: The New 3D Printing Thread - by Super - 02-02-2019, 07:01 AM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 10:48 AM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 02:35 PM

RE: The New 3D Printing Thread - by Super - 02-02-2019, 03:34 PM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 04:09 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 10:15 AM

RE: The New 3D Printing Thread - by Super - 02-03-2019, 01:57 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 07:04 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-03-2019, 11:35 PM

RE: The New 3D Printing Thread - by chrisjo - 02-04-2019, 08:24 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 11:57 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-04-2019, 08:53 PM

RE: The New 3D Printing Thread - by Nigels - 02-05-2019, 11:42 PM

RE: The New 3D Printing Thread - by Super - 02-06-2019, 10:30 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 02-08-2019, 02:03 AM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-08-2019, 02:21 AM

RE: The New 3D Printing Thread - by Nigels - 02-09-2019, 10:49 AM

RE: The New 3D Printing Thread - by Super - 02-09-2019, 12:30 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 02-09-2019, 08:31 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-10-2019, 01:57 AM

RE: The New 3D Printing Thread - by Nigels - 02-12-2019, 05:47 AM

RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 01:26 AM

RE: The New 3D Printing Thread - by ripley802 - 02-22-2019, 02:00 AM

RE: The New 3D Printing Thread - by Super - 02-22-2019, 07:16 AM

RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 06:01 PM

RE: The New 3D Printing Thread - by Super - 02-22-2019, 11:26 PM

RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 04:29 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-24-2019, 06:29 PM

RE: The New 3D Printing Thread - by Off The Rails - 02-24-2019, 10:45 PM

RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 11:35 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-05-2019, 12:39 AM

RE: The New 3D Printing Thread - by Nigels - 03-05-2019, 04:44 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-06-2019, 06:15 PM

RE: The New 3D Printing Thread - by Nigels - 03-17-2019, 08:44 PM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 12:18 AM

RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 02:41 AM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:40 AM

RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 08:28 PM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:09 PM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 12:24 AM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:34 AM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 06:48 PM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 06:55 PM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 10:14 PM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:29 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 12:06 AM

RE: The New 3D Printing Thread - by sunhuntin - 03-20-2019, 05:43 AM

RE: The New 3D Printing Thread - by Super - 03-20-2019, 12:22 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 07:30 PM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 03-26-2019, 11:49 PM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 04-03-2019, 04:44 AM

RE: The New 3D Printing Thread - by Nigels - 04-03-2019, 06:06 AM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 04-03-2019, 06:29 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-21-2019, 06:53 PM

RE: The New 3D Printing Thread - by Nigels - 04-21-2019, 08:16 PM

RE: The New 3D Printing Thread - by Nigels - 05-27-2019, 06:17 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-20-2019, 02:54 AM

RE: The New 3D Printing Thread - by Super - 05-28-2019, 12:07 AM

RE: The New 3D Printing Thread - by Finno - 05-28-2019, 09:24 AM

RE: The New 3D Printing Thread - by 2ARail - 06-17-2019, 03:01 PM

RE: The New 3D Printing Thread - by Nigels - 06-17-2019, 06:36 PM

RE: The New 3D Printing Thread - by Super - 06-17-2019, 06:47 PM

RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 10:35 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-20-2019, 10:55 PM

RE: The New 3D Printing Thread - by Super - 06-20-2019, 11:01 PM

RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 11:59 PM

RE: The New 3D Printing Thread - by Super - 06-21-2019, 12:40 AM

RE: The New 3D Printing Thread - by Nigels - 06-21-2019, 08:31 AM

RE: The New 3D Printing Thread - by DalaGStanator - 06-21-2019, 08:07 AM

RE: The New 3D Printing Thread - by Nigels - 06-22-2019, 12:54 AM

RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 05:20 PM

RE: The New 3D Printing Thread - by Super - 07-28-2019, 07:10 PM

RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 09:50 PM

RE: The New 3D Printing Thread - by Super - 07-29-2019, 11:55 AM

RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 01:05 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 07-29-2019, 10:39 PM

RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 11:14 PM

RE: The New 3D Printing Thread - by Super - 07-30-2019, 07:39 AM

RE: The New 3D Printing Thread - by Nigels - 07-30-2019, 09:12 AM

RE: The New 3D Printing Thread - by Nigels - 08-07-2019, 09:08 PM

RE: The New 3D Printing Thread - by Super - 08-07-2019, 10:33 PM

RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 12:22 AM

RE: The New 3D Printing Thread - by Super - 08-08-2019, 01:59 AM

RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 10:38 PM

RE: The New 3D Printing Thread - by Super - 08-09-2019, 03:46 AM

RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 03:15 PM

RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 07:12 PM

RE: The New 3D Printing Thread - by Super - 08-11-2019, 11:59 AM

RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 08:12 PM

RE: The New 3D Printing Thread - by AdamdBoyd - 11-21-2020, 09:46 PM

RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 09:21 PM

RE: The New 3D Printing Thread - by Super - 08-12-2019, 11:45 AM

RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:45 PM

RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:56 PM

RE: The New 3D Printing Thread - by Nigels - 08-15-2019, 09:01 PM

RE: The New 3D Printing Thread - by ripley802 - 08-15-2019, 11:19 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 09-17-2019, 10:51 AM

RE: The New 3D Printing Thread - by Super - 08-16-2019, 03:22 AM

RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:07 PM

RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:10 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 09-16-2019, 09:25 PM

RE: The New 3D Printing Thread - by Super - 09-17-2019, 02:44 AM

RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 06:39 PM

RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 09:53 PM

RE: The New 3D Printing Thread - by Super - 09-18-2019, 09:19 AM

RE: The New 3D Printing Thread - by Nigels - 09-18-2019, 08:14 PM

RE: The New 3D Printing Thread - by Super - 09-19-2019, 03:31 PM

RE: The New 3D Printing Thread - by Nigels - 09-19-2019, 10:20 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 09-19-2019, 10:25 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 06:21 PM

RE: The New 3D Printing Thread - by Super - 09-20-2019, 07:21 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 08:45 PM

RE: The New 3D Printing Thread - by Super - 09-20-2019, 09:13 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 09:37 PM

RE: The New 3D Printing Thread - by Nigels - 09-25-2019, 08:14 PM

RE: The New 3D Printing Thread - by Super - 09-26-2019, 09:31 AM

RE: The New 3D Printing Thread - by Nigels - 09-26-2019, 09:03 PM

RE: The New 3D Printing Thread - by Super - 09-27-2019, 02:07 AM

RE: The New 3D Printing Thread - by Nigels - 10-04-2019, 09:59 PM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 12:25 AM

RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 01:32 AM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 04:52 AM

RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 09:38 PM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 11:30 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-06-2019, 12:08 AM

RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 12:35 AM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-07-2019, 11:11 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:53 PM

RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 07:57 PM

RE: The New 3D Printing Thread - by Super - 10-07-2019, 12:40 AM

RE: The New 3D Printing Thread - by Nigels - 10-07-2019, 08:42 PM

RE: The New 3D Printing Thread - by Super - 10-07-2019, 09:22 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:55 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 10:03 PM

RE: The New 3D Printing Thread - by Super - 10-09-2019, 12:14 AM

RE: The New 3D Printing Thread - by Nigels - 10-15-2019, 10:55 PM

RE: The New 3D Printing Thread - by Super - 10-16-2019, 12:08 AM

RE: The New 3D Printing Thread - by Nigels - 10-16-2019, 12:23 AM

RE: The New 3D Printing Thread - by Super - 10-16-2019, 02:35 AM

RE: The New 3D Printing Thread - by Nigels - 10-18-2019, 10:43 PM

RE: The New 3D Printing Thread - by Super - 10-19-2019, 08:37 AM

RE: The New 3D Printing Thread - by Nigels - 10-19-2019, 05:42 PM

RE: The New 3D Printing Thread - by drew5195 - 10-21-2019, 06:58 AM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:11 PM

RE: The New 3D Printing Thread - by chrisjo - 10-22-2019, 05:11 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:44 PM

RE: The New 3D Printing Thread - by Super - 10-21-2019, 08:14 AM

RE: The New 3D Printing Thread - by drew5195 - 10-22-2019, 04:32 AM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:42 PM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:28 PM

RE: The New 3D Printing Thread - by Super - 10-21-2019, 09:10 PM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 11:14 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-21-2019, 10:47 PM

RE: The New 3D Printing Thread - by Super - 10-22-2019, 05:38 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:45 PM

RE: The New 3D Printing Thread - by Super - 10-23-2019, 07:35 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 07:43 PM

RE: The New 3D Printing Thread - by Nigels - 10-29-2019, 09:04 PM

RE: The New 3D Printing Thread - by Super - 10-29-2019, 09:24 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 12:52 AM

RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 06:11 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 01:34 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 09:23 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 09:31 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 10:11 PM

RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 09:54 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 10:36 PM

RE: The New 3D Printing Thread - by Nigels - 10-31-2019, 09:36 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-14-2020, 03:38 AM

RE: The New 3D Printing Thread - by Nigels - 05-11-2020, 06:12 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 05-11-2020, 08:39 AM

RE: The New 3D Printing Thread - by Nigels - 05-13-2020, 07:49 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 05-13-2020, 08:19 PM

RE: The New 3D Printing Thread - by Nigels - 06-03-2020, 11:23 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-04-2020, 12:27 AM

RE: The New 3D Printing Thread - by Super - 06-04-2020, 10:38 AM

RE: The New 3D Printing Thread - by Nigels - 06-04-2020, 09:41 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-04-2020, 07:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 11-21-2020, 10:37 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 06-26-2022, 05:09 AM

RE: The New 3D Printing Thread - by Super - 06-26-2022, 12:06 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-07-2022, 02:00 PM

RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 04:52 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-07-2022, 05:02 PM

RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 11:12 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-08-2022, 01:54 AM

RE: The New 3D Printing Thread - by Nigels - 07-08-2022, 05:14 PM

RE: The New 3D Printing Thread - by Super - 07-08-2022, 09:38 AM

RE: The New 3D Printing Thread - by Super - 07-10-2022, 11:14 AM

RE: The New 3D Printing Thread - by Nigels - 07-10-2022, 09:22 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 02:19 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 06:10 PM

RE: The New 3D Printing Thread - by Nigels - 07-11-2022, 10:17 PM

RE: The New 3D Printing Thread - by DalaGStanator - 07-11-2022, 07:32 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 04:41 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 09:18 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 09:19 AM

RE: The New 3D Printing Thread - by Super - 07-12-2022, 10:40 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 12:35 PM

RE: The New 3D Printing Thread - by Nigels - 07-12-2022, 08:01 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-13-2022, 02:15 PM

RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:09 PM

RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:13 PM

RE: The New 3D Printing Thread - by chrisjo - 07-14-2022, 06:25 AM

RE: The New 3D Printing Thread - by Nigels - 07-14-2022, 09:33 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-15-2022, 02:26 AM

RE: The New 3D Printing Thread - by Nigels - 07-16-2022, 03:34 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:36 PM

RE: The New 3D Printing Thread - by Super - 07-15-2022, 10:12 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:47 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 09-03-2022, 06:31 PM

RE: The New 3D Printing Thread - by ERTLSixteen - 11-20-2022, 07:14 AM

RE: The New 3D Printing Thread - by juhs - 12-20-2022, 06:10 AM

RE: The New 3D Printing Thread - by mitzalplik - 12-23-2022, 07:22 PM

RE: The New 3D Printing Thread - by Super - 12-20-2022, 08:32 AM

RE: The New 3D Printing Thread - by chrisjo - 12-28-2022, 09:36 PM

RE: The New 3D Printing Thread - by Super - 12-29-2022, 06:24 AM

RE: The New 3D Printing Thread - by Nigels - 12-29-2022, 09:31 PM

RE: The New 3D Printing Thread - by Super - 12-29-2022, 10:00 PM

RE: The New 3D Printing Thread - by chrisjo - 12-29-2022, 10:21 PM

RE: The New 3D Printing Thread - by Super - 12-30-2022, 08:32 AM

RE: The New 3D Printing Thread - by chrisjo - 12-30-2022, 04:37 PM

RE: The New 3D Printing Thread - by Nigels - 12-30-2022, 09:04 PM

RE: The New 3D Printing Thread - by Nigels - 12-31-2022, 05:31 PM

RE: The New 3D Printing Thread - by Nigels - 01-05-2023, 10:41 PM

RE: The New 3D Printing Thread - by Super - 01-06-2023, 09:00 AM

RE: The New 3D Printing Thread - by chrisjo - 01-06-2023, 05:20 PM

RE: The New 3D Printing Thread - by Nigels - 01-06-2023, 09:22 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-09-2023, 07:33 PM

RE: The New 3D Printing Thread - by Nigels - 01-10-2023, 10:30 PM

RE: The New 3D Printing Thread - by plarnold - 01-14-2023, 05:09 AM

RE: The New 3D Printing Thread - by chrisjo - 01-14-2023, 10:04 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 01-13-2023, 12:15 PM

RE: The New 3D Printing Thread - by Super - 01-13-2023, 03:24 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-14-2023, 02:17 AM

RE: The New 3D Printing Thread - by chrisjo - 01-18-2023, 06:04 PM

RE: The New 3D Printing Thread - by Nigels - 01-18-2023, 09:50 PM

RE: The New 3D Printing Thread - by chrisjo - 01-20-2023, 04:18 PM

RE: The New 3D Printing Thread - by Nigels - 01-20-2023, 10:19 PM

RE: The New 3D Printing Thread - by Super - 01-21-2023, 09:36 AM

RE: The New 3D Printing Thread - by chrisjo - 01-21-2023, 11:22 AM

RE: The New 3D Printing Thread - by Super - 01-21-2023, 11:30 AM

RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:38 PM

RE: The New 3D Printing Thread - by drew5195 - 01-21-2023, 09:03 PM

RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:46 PM

RE: The New 3D Printing Thread - by Super - 01-22-2023, 12:53 AM

RE: The New 3D Printing Thread - by Nigels - 01-22-2023, 06:43 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 11:40 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-23-2023, 11:47 AM

RE: The New 3D Printing Thread - by Nigels - 01-23-2023, 08:32 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 09:04 PM

RE: The New 3D Printing Thread - by Nigels - 01-25-2023, 09:06 PM

RE: The New 3D Printing Thread - by Super - 01-23-2023, 10:33 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 10:46 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 01-25-2023, 02:45 AM

RE: The New 3D Printing Thread - by Super - 01-25-2023, 07:44 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-25-2023, 08:10 AM

RE: The New 3D Printing Thread - by chrisjo - 01-25-2023, 09:47 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-29-2023, 04:19 AM

RE: The New 3D Printing Thread - by juhs - 02-08-2023, 05:36 AM

RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 07:53 AM

RE: The New 3D Printing Thread - by Super - 02-08-2023, 10:15 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 02-08-2023, 01:41 PM

RE: The New 3D Printing Thread - by Super - 02-08-2023, 05:40 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 02-08-2023, 06:05 PM

RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 06:58 PM

RE: The New 3D Printing Thread - by chrisjo - 03-11-2023, 02:14 PM

RE: The New 3D Printing Thread - by Nigels - 03-12-2023, 01:08 AM

RE: The New 3D Printing Thread - by Super - 03-12-2023, 05:25 AM

RE: The New 3D Printing Thread - by Nigels - 03-13-2023, 12:37 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-26-2023, 08:19 PM

RE: The New 3D Printing Thread - by Nigels - 03-26-2023, 10:07 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-27-2023, 01:29 AM

RE: The New 3D Printing Thread - by Super - 03-26-2023, 11:22 PM

RE: The New 3D Printing Thread - by Super - 03-27-2023, 01:39 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-27-2023, 10:57 PM

RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 10:47 AM

RE: The New 3D Printing Thread - by jbdolan - 04-05-2023, 09:32 PM

RE: The New 3D Printing Thread - by Nigels - 04-06-2023, 09:08 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-06-2023, 10:04 PM

RE: The New 3D Printing Thread - by chrisjo - 03-27-2023, 01:38 PM

RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 09:11 PM

RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 07:25 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-29-2023, 01:48 AM

RE: The New 3D Printing Thread - by Therealblack64YT - 03-28-2023, 08:14 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-29-2023, 01:50 AM

RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 09:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-05-2023, 03:09 AM

RE: The New 3D Printing Thread - by chrisjo - 04-05-2023, 08:11 AM

RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:39 AM

RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:13 PM

RE: The New 3D Printing Thread - by jbdolan - 04-07-2023, 05:47 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-07-2023, 08:37 PM

RE: The New 3D Printing Thread - by Super - 04-07-2023, 09:07 AM

RE: The New 3D Printing Thread - by chrisjo - 04-08-2023, 07:40 AM

RE: The New 3D Printing Thread - by Nigels - 04-08-2023, 10:15 PM

RE: The New 3D Printing Thread - by jbdolan - 04-08-2023, 06:46 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-08-2023, 11:32 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 05:26 PM

RE: The New 3D Printing Thread - by Super - 04-09-2023, 10:14 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 10:54 PM

RE: The New 3D Printing Thread - by Nigels - 04-10-2023, 07:57 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-11-2023, 02:06 PM

RE: The New 3D Printing Thread - by Nigels - 04-11-2023, 08:01 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-12-2023, 01:35 PM

RE: The New 3D Printing Thread - by Nigels - 04-12-2023, 09:15 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-13-2023, 01:17 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 05-13-2023, 03:59 AM

RE: The New 3D Printing Thread - by Super - 05-13-2023, 04:06 AM

RE: The New 3D Printing Thread - by Nigels - 05-13-2023, 03:35 PM

RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 04:54 AM

RE: The New 3D Printing Thread - by Nigels - 05-31-2023, 07:33 PM

RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 08:51 PM

RE: The New 3D Printing Thread - by Densha - 06-27-2023, 01:20 AM

RE: The New 3D Printing Thread - by Super - 05-31-2023, 11:42 AM

RE: The New 3D Printing Thread - by Super - 05-31-2023, 08:10 PM

RE: The New 3D Printing Thread - by drew5195 - 07-10-2023, 12:54 AM

RE: The New 3D Printing Thread - by Super - 07-10-2023, 04:42 AM

RE: The New 3D Printing Thread - by Nigels - 07-27-2023, 07:35 PM

RE: The New 3D Printing Thread - by Super - 07-28-2023, 12:13 AM

RE: The New 3D Printing Thread - by chrisjo - 07-28-2023, 08:36 AM

RE: The New 3D Printing Thread - by Super - 07-28-2023, 08:52 AM

RE: The New 3D Printing Thread - by drew5195 - 07-28-2023, 10:56 AM

RE: The New 3D Printing Thread - by Nigels - 08-05-2023, 03:57 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 08-12-2023, 04:05 PM

RE: The New 3D Printing Thread - by Densha - 08-13-2023, 08:01 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 08-13-2023, 09:47 PM

RE: The New 3D Printing Thread - by chrisjo - 08-16-2023, 12:05 PM

RE: The New 3D Printing Thread - by Super - 08-17-2023, 02:03 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 06:58 PM

RE: The New 3D Printing Thread - by Super - 11-13-2023, 07:38 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 07:48 PM

RE: The New 3D Printing Thread - by Nigels - 11-13-2023, 08:59 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-14-2023, 07:27 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 11-14-2023, 06:09 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-19-2024, 01:01 PM

RE: The New 3D Printing Thread - by Nigels - 01-19-2024, 07:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-20-2024, 06:13 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-26-2024, 06:23 PM

RE: The New 3D Printing Thread - by Super - 01-27-2024, 11:09 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-28-2024, 05:08 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 02-17-2024, 07:19 PM

RE: The New 3D Printing Thread - by Nigels - 02-19-2024, 12:16 AM

RE: The New 3D Printing Thread - by Nigels - 03-14-2024, 11:47 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 03-17-2024, 01:04 PM

RE: The New 3D Printing Thread - by Nigels - 03-18-2024, 09:06 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 03-20-2024, 05:11 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2024, 11:01 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 03-15-2024, 06:08 AM

RE: The New 3D Printing Thread - by Nigels - 03-15-2024, 02:16 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 03-30-2024, 08:35 PM

RE: The New 3D Printing Thread - by Super - 03-31-2024, 11:59 AM

RE: The New 3D Printing Thread - by Nigels - 03-31-2024, 07:47 PM

View a Printable Version

Users browsing this thread: 2 Guest(s)