i need help setting up a spiral

9 Replies, 2393 Views

hullo, self explanatory, im tryna make an 18 high spiral, how much risers, supports, rounds and A/B pieces do i need?
[-] The following 1 user Likes GordonFlipFaceParty's post:
  • Super
a lot Smile
dreaming of piles of track 
Iirc you need 8 curve tracks to complete one full circle you are looking at 144a/b pieces.
My Trackmaster/Tomy/Plarail Photo Gallery Page (over 600+ photos and still under construction)
https://www.flickr.com/photos/183311600@N03/
[-] The following 1 user Likes leylandvictory2's post:
  • Super
(10-23-2022, 01:02 PM)stainedgaming Wrote: a lot Smile

true
[-] The following 1 user Likes GordonFlipFaceParty's post:
  • Super
There are many different spirals. For a start, are you planning one where:

a) you enter at the bottom and exit at the top (or vice versa)

or is it a self-contained one where:

b) you start at the bottom, go up to the top, and then spiral down to the start again?

If you're planning to use the curve ramp A/B pieces you'll only need either A or B, not both, unless you're going to have two spirals next to each other, one up and one down. Most spirals don't use these pieces at all.
[Image: image.png] [Image: image.png]

https://kurashimemo.net/family/train/pla...er-layout/

[Image: image.png]

This one does:
https://www.takaratomy.co.jp/products/pl...lan29.html

[Image: image.png]
[-] The following 2 users Like chrisjo's post:
  • generic_truck_69420, Super
Thank you Dr Chris
[Image: super-smiley-emoticon.gif]
Looking at this video it looks like that for a 5 level spiral it would use 35 3" piers along with what looks like 2 or 3 3/4" piers. In this version they don't use the A/B rising curves but 40 curved rails. In my opinion not using the A/B risers the trains climb and descent more smoothly as the A & B curves have flats on them. I may have counted wrong so I could be corrected.

So my rudimentary math head thinks that for an 18 level spiral going up and one going down for a continuous ride would take approx 288 3" piers and 288 curves. You could save by using a Plarail U turn at the top and one at the bottom but you would have to created so king of rigging to hold it up on top.

I do remember seeing a video of a floor to ceiling tower possibly two, before, it may have been from a former member and good friend who is no longer with us and his immense collection of videos seems to be gone.

I am not an insto gammar but there may be videos here if anyone can see them. https://www.instagram.com/djxtrodinaire/

[Image: super-smiley-emoticon.gif]
(10-23-2022, 07:21 PM)chrisjo Wrote: There are many different spirals. For a start, are you planning one where:

a) you enter at the bottom and exit at the top (or vice versa)

or is it a self-contained one where:

b) you start at the bottom, go up to the top, and then spiral down to the start again?

[Image: image.png]is what im trying to build, 18 risers on one high
(This post was last modified: 10-24-2022, 05:16 PM by Super.)
Here's a nice one using slope rails rather than curve ramps to achieve the change of levels:

[Image: 20220203_img10.jpg]
[-] The following 2 users Like chrisjo's post:
  • generic_truck_69420, Super
Thats a neat spiral
[Image: super-smiley-emoticon.gif]



Users browsing this thread: 1 Guest(s)